Charcoal
- Not to be confused with Coal

Charcoal is a lightweight black carbon residue produced by strongly heating wood (or other animal and plant materials) in minimal oxygen to remove all water and volatile constituents.
Uses
Fuel
Charcoal is most commonly used as a fuel for cooking, heating and manufacturing processes.
Due to its porosity, it is sensitive to the flow of air and the heat generated can be moderated by controlling the air flow to the fire. For this reason charcoal is still widely used by blacksmiths. To start the charcoal burning is harder than starting a wood fire and charcoal lighter fluid may be employed. A chimney starter or electric charcoal starter are tools to help with starting to light charcoal.
Filtration
- See also: Activated charcoal
Charcoal processed into activated charcoal is commonly used to filter contaminants from water and air, among many other uses.
Activated charcoal readily adsorbs a wide range of organic compounds dissolved or suspended in gases and liquids. It is also used to absorb odors and toxins in gases, such as air. Charcoal filters are also used in some types of gas masks. The medical use of activated charcoal is mainly the absorption of poisons.
Carbon feedstock
Charcoal can be used as a carbon feedstock for the production of items like as black powder.
It is usually ground into a fine powder, with airfloat grade being the finest particle size available commercially. When used in black powder compositions, it is often ball-milled with other ingredients so that they are intimately mixed together.
Production methods
Mound
Wood is collected and cut broken into lengths of roughly 40-70cm. A hole is dug and a larger piece of wood is driven into it so that it stays upright and acts as a central "post" for the other pieces of wood to lay against. The rest of the wood is stacked around the post upright, with the largest pieces in the center and smaller sticks and leaves around the outside so that it's sides slope downward. The woodpile is coated with mud and leaves to prevent gas exchange, except for a hole at the top and 8 smaller air holes around the circumference. A fire is lite at the top hole to set the covered woodpile alight.
Once the fire has burned up against the lower air holes, plug all the holes to seal the mound. When the mound is cool to the touch (this can take as long as 2 days) excavate the mound and harvest the charcoal.
Dependencies
See also
References
| This article uses material from the Wikipedia article charcoal, which is released under the Creative Commons Attribution-ShareAlike 3.0 Unported License (view authors). |
| This article uses material from the Wikipedia article activated_charcoal, which is released under the Creative Commons Attribution-ShareAlike 3.0 Unported License (view authors). |
External links
- Making Charcoal - primitivetechnology.wordpress.com, 19 February 2016
- Reusable Charcoal Mound - primitivetechnology.wordpress.com, 17 June 2017
- Blower and Charcoal - primitivetechnology.wordpress.com, 18 May 2018
- Primitive Technology: Charcoal - Primitive Technology, 19 February 2016, YouTube
- Primitive Technology: Reusable charcoal mound - Primitive Technology, 17 June 2017, YouTube
- Primitive Technology: Blower and charcoal - Primitive Technology, 18 May 2018, YouTube
- charcoal stove | charcoal making oven In forest. pre technology .survival - Pre Technology, 14 June 2022, YouTube